I suggest saving it with the name you gave it, cisco, so that you don’t have to configure it again next time. When you are done and try to close out HyperTerminal, you will be asked if you want to save this connection. You have successfully configured HyperTerminal and connected to your Cisco device. In the HyperTerminal window, you should see the boot up process for your device, like this: On the next window, change the Baud rate to 9600 and click OK. On the next window that appears, make sure that the “Connect Using” field says COM1 and click OK. Type in the word cisco for the connection name and click OK.Ĭonnect your Cisco device to your PC’s COM1 port but don’t turn it on yet. Note that this is not required but let’s go ahead and do it. HyperTerminal prompts you to create a new connection. Run HyperTerminal in Windows by going to Start > Programs > Accessories > Communications > HyperTerminal.Īfter clicking on the HyperTerminal icon, you will see this window: Connecting to your Cisco device with HyperTerminal In the case of the network, HyperTerminal is simply using the telnet protocol. HyperTerminal can either use the local serial interface for communications or the network. That device could be either a serial device, like a Cisco router, connected directly to your PC’s serial port OR a network device. What this means is that it offers you a text-based command prompt on a remote device. HyperTerminal is a terminal emulator program that runs in Windows.
#Hyperterm replacemant for win 10 how to#
This article will show you how to configure HyperTerminal to talk to a new Cisco device. While there are a variety of serial terminal emulation programs available, most people use HyperTerminal to do this because it is included free with Windows.
You must configure them from the command line using the serial-based console port on the switch or router. Most Cisco devices do not have a graphical Web-based interface by default.
0 kommentar(er)
